Colorlight VX6 LED Video Controller
The Colorlight VX6 combines video processing and LED display control for stage, rental and broadcast installations. It accepts 4K and HD sources and provides six Gigabit Ethernet outputs, with a maximum loading capacity of 3.93 million pixels. Optical connections, three layers and Genlock support give installers options for signal routing and synchronization.

Technical Specifications
| Parameter | Specification |
|---|---|
| Maximum input resolution | 4096 × 2160 at 60 Hz |
| Video inputs | 1 × HDMI 2.0; 1 × HDMI 1.4 with loop; 2 × DVI, one with loop; 1 × 3G-SDI with loop; Fiber1 input |
| Color depth | 8-bit / 10-bit video signals and processing |
| LED Ethernet outputs | 6 × Gigabit Ethernet |
| Maximum loading capacity | 3.93 million pixels |
| Maximum canvas dimensions | 16,384 pixels wide or 8,192 pixels high, within the total loading capacity |
| Optical ports | 2 × 10G fiber; Fiber1 copies six Ethernet outputs and Fiber2 copies/backs up six outputs in output use |
| HDMI output | 1 × HDMI 1.3 for preview or video output |
| Layers | 3, with independent size and position adjustment |
| Frame-rate range | 23.98–240 Hz; subject to supported resolution and signal format |
| Working modes | Video processor, fiber optic transceiver and Bypass |
| Control | USB control/cascading, RS-232 and LAN TCP/IP |
Routing, Synchronization and Latency
Use the video processor mode for cropped, scaled and layered content. Fiber optic transceiver and Bypass modes serve different signal paths, so configure the mode before planning output and backup connections. The zero-latency claim applies to Bypass mode; it should not be treated as a promise for every processing configuration.
HDR and Genlock with loop-through are supported. HDMI accepts audio input, while audio output uses a multifunction card. Confirm receiver, optical equipment and accessory compatibility for the intended installation.
Frequently Asked Questions
How many Ethernet outputs does the Colorlight VX6 have?
The VX6 has six Gigabit Ethernet output ports and a maximum total loading capacity of 3.93 million pixels.
Can the VX6 accept 4K video?
Yes. Maximum input resolution is 4096 × 2160 at 60 Hz. Check the interface and supported format for your source, because the HD input ports do not all accept the maximum 4K timing.
Does the VX6 provide zero latency in every mode?
No. The specification associates zero latency with Bypass mode. Processing mode, scaling and other settings must be considered when planning a low-delay signal path.
Can the VX6 output audio directly from HDMI?
The listed HDMI audio function is input. The product specification describes audio output through a multifunction card, so check the required accessory for your system.
Can it drive a full 16,384 × 8,192 LED canvas?
No. Those are independent maximum width and height limits. The actual screen must also stay within the maximum total loading capacity of 3.93 million pixels.




Reviews
There are no reviews yet.