400 W power supply for 5 V LED displays
The Rong-Electric MNS400H5G is a 5 V LED display power supply with a 0–80 A output current range. It is rated for 200–240 V AC input, so checking the mains supply is essential when selecting it for a new cabinet or replacement.
Technical parameters
The following values come from the linked MNS400H5G V1.0 specification.
| Parameter | Specification |
|---|---|
| Model | MNS400H5G |
| Rated output power | 400 W |
| Rated DC output | 5.0 V |
| Output current | 0–80 A |
| Output voltage range | 4.90–5.1 V DC |
| Rated AC input | 200–240 V AC |
| Input frequency | 47–63 Hz; includes 50/60 Hz |
| Maximum input current | ≤5 A |
| Efficiency | ≥89% at 220 V AC, full load and room temperature |
| Dimensions (L × W × H) | 220 × 47 × (26 ±0.5) mm |
| Weight | 433 g |
| Operating temperature | −30 to +60°C; observe the temperature derating curve |
| Cooling | Ventilation cooling |
| Protection | Input undervoltage (overview), output current limiting and short circuit |
Selection and installation
Match the LED modules to the 4.90–5.1 V DC output range, then check peak load, cabinet temperature and the derating curves. The 220 mm long housing is 47 mm wide; mounting holes and terminal positions must also match the installation.
The PDF specifies an aluminum substrate for full-load burn-in testing. Its note gives 300 × 300 × 30 mm; confirm the required thermal arrangement for your installation rather than assuming a different thickness. The maximum 5 A input current is separate from the 80 A DC output rating.
Product image

Frequently asked questions
Is the MNS400H5G rated for 5 V and 80 A?
Yes. The PDF lists 5.0 V DC, an output current range of 0–80 A and rated output power of 400 W. Actual loading must follow the input and temperature derating curves.
Does the MNS400H5G support 110 V AC input?
The rated input is 200–240 V AC. Do not select this model for a 110 V AC supply based only on its 5 V output rating.
Is the 5 A value the output current?
No. The maximum input current is ≤5 A. The DC output current range is 0–80 A; these values refer to different sides of the power supply.
What cooling information should I check before installation?
The specification lists ventilation cooling and provides a temperature derating curve. It also calls for an aluminum substrate during full-load burn-in testing. Review those conditions and the cabinet temperature before selecting the load.
Where can I download the MNS400H5G specification?
The original PDF is linked below and includes electrical ratings, dimensions, connector definitions and derating curves.
Download specification
Rong-Electric MNS400H5G LED Display Power Supply Specification



Reviews
There are no reviews yet.