5 V 80 A power supply for LED displays
The Rong-Electric MNS400PC5 is a 400 W LED display power supply with a rated 5.0 V DC output and a 0–80 A current range. Its narrow housing measures 220 × 47 × 26 mm, but installation planning must also include the heat sink specified in the datasheet.
Technical parameters
The table follows the linked MNS400PC5 V1.0 specification dated December 30, 2021. Check its input and temperature derating curves before selecting the load.
| Parameter | Specification |
|---|---|
| Model | MNS400PC5 |
| Output power | 400 W |
| Rated DC output | 5.0 V |
| Output current | 0–80 A |
| Output voltage range | 4.9–5.1 V DC |
| Rated AC input | 100–240 V AC |
| Input voltage range | 90–264 V AC |
| Input frequency | 47–63 Hz |
| Efficiency (PDF electrical table) | ≥89% at 220 V AC, full load and room temperature |
| Dimensions (L × W × H) | 220 × 47 × 26 mm |
| Weight | Approximately 378 g |
| Operating temperature (PDF environmental table) | −30 to +50°C; see the PDF derating curves |
| Auxiliary heat sink | 400 × 400 × 3.0 mm at the bottom, as specified in the PDF |
| Cooling | Ventilation cooling |
| Output protection | Overcurrent and short circuit |
Specification notes for selection
The earlier listing stated an efficiency of ≥88% and an operating range of −40 to +70°C. The linked PDF instead lists ≥89% at 220 V AC and full load, and −30 to +50°C in its environmental table. These differences should be confirmed for the supplied revision if they affect your design; the wider temperature range is not assumed.
The earlier listing also gives a power factor of ≥0.95 and leakage current of ≤1.0 mA at 242 V AC. The PDF lists leakage current <1.0 mA at 220 V AC and does not provide a matching power-factor value. Confirm these conditions before relying on them for a project.
Product images


Frequently asked questions
What are the MNS400PC5 output ratings?
The main electrical specification lists 400 W, a 5.0 V DC output and a current range of 0–80 A. The output voltage range is 4.9–5.1 V DC.
Can the MNS400PC5 operate on 110 V AC?
Its rated input is 100–240 V AC and the specified range is 90–264 V AC. Check the input-voltage derating curve for the permitted load at your supply voltage.
Does this narrow power supply need an additional heat sink?
Yes. The PDF environmental table calls for a 400 × 400 × 3.0 mm heat sink under the power supply. Include this requirement when checking cabinet space and cooling.
Which operating temperature should I use for selection?
The linked PDF environmental table lists −30 to +50°C. The earlier product listing stated −40 to +70°C, so confirm the applicable specification with the supplier if your installation depends on that wider range.
Where can I find mounting dimensions and the datasheet?
The MNS400PC5 specification PDF is linked below and contains mounting drawings, connector definitions and derating curves. The housing dimensions are 220 × 47 × 26 mm.
Download specification
Rong-Electric MNS400PC5 LED Display Power Supply Specification





Reviews
There are no reviews yet.