The Linsn RV907H receiving card provides four module output interfaces and a 90-degree 26-pin connection for cabinet integration. Each interface carries up to six parallel data groups. The original size text reads “479 mm × 1365 mm”; because this appears inconsistent with the board description, verify the physical dimensions and mounting drawing before designing an adapter.
Technical specifications
| Parameter | Specification |
|---|---|
| Model | RV907H |
| Module outputs | 4 interfaces; up to 6 parallel data groups each |
| Total parallel data | 24 groups |
| Serial data | 16 groups |
| Interface arrangement | 90-degree 26-pin |
| Maximum listed load | 1024 × 256 pixels |
| Signal processing | 18-bit; up to 18-bit grayscale per RGB channel |
| Source color support | 12-bit with a compatible ninth-generation sending card |
| Calibration / configuration | 1024-level chromaticity correction, color-space conversion and configuration readback |
| Power connection | VCC pins at module interfaces; confirm wiring |
Linsn RV907H LED Screen receiving card Specification
Frequently asked questions
Does the RV907H require a separate hub board?
The four output interfaces are described as able to drive compatible modules directly. Check the exact pinout and module wiring before omitting a hub board.
Is the 12-bit HDMI statement an HDMI socket specification?
No. It describes source-color support when used with a compatible ninth-generation sending card, not a physical HDMI socket on the receiver.
What dimensions should I use for an RV907H mounting design?
The original dimensional text is inconsistent with the product description. Confirm the actual board dimensions and mounting-hole drawing instead of interpreting or correcting that text by guesswork.




Reviews
There are no reviews yet.