This product is listed as the Linsn RV902H receiving card. Its original description also names RV902 and RV802, so the specifications below are identified as original listing information and should be checked against the exact board version before replacement or system design.
Technical specifications
| Parameter | Specification |
|---|---|
| Listed model | RV902H; original description also references RV902 |
| Original listed load | 1024 × 256 pixels |
| Signal processing listed | Up to 18-bit grayscale per RGB channel |
| Source-color condition | 12-bit source color requires a TS901 sending card |
| Calibration listed | 1024-level point color correction and color-space conversion |
| Backup listed | Dual-receiver hot backup |
| Monitoring listed | Cabinet door, temperature, two fan-speed and three voltage channels |
| Optional functions | Humidity and smoke require separate modules; pixel fault detection requires supported ICs |
| Diagnostics listed | Network cable errors and ribbon cable faults |
Frequently asked questions
Are RV902H and RV902 guaranteed to be interchangeable?
No. The original description mixes the model names. Check the exact board marking, connectors, firmware and cabinet configuration before selecting a replacement.
Does the receiving card have a direct HDMI input?
The original 12-bit color statement requires a TS901 sending card. It does not establish a physical HDMI input on the receiver.
Are humidity and smoke monitoring modules included?
The original description specifies separately purchased humidity and smoke modules. Confirm the ordered accessories and exact board support.




Reviews
There are no reviews yet.