JPS400PV5.0 supply for 5V LED displays
The G-Energy JPS400PV5.0 is a 5.0V LED display power supply with a listed maximum output power of 400W. Its housing measures 235 × 60 × 35mm, so cabinet length and cable access are important checks when comparing replacement supplies.
| Parameter | Specification |
|---|---|
| Model | JPS400PV5.0 |
| Output voltage | 5.0V |
| Maximum output power | 400W |
| AC input | 100–240Vac, 47–63Hz |
| Leakage current | <1mA (listed condition: Vin:230) |
| Cooling | Natural cooling |
| Operating temperature | −30°C to 50°C |
| Storage temperature | −40°C to 80°C |
| Dimensions (L × W × H) | 235 × 60 × 35mm; listed tolerance ±0.5mm |
| Insulation voltage | I/P–O/P: 3.0KVac; I/P–FG: 1.5KVac; O/P–FG: 0.5KVac |
| Safety standards referenced in product information | GB4943, EN60950 |
| Listed protection functions | Input undervoltage, overload (OLP), output short circuit and overtemperature |
Installation and specification checks
Check the required output voltage and actual LED load, then compare the housing, mounting points and terminal arrangement with your cabinet. The −30°C to 50°C operating range is separate from the storage range. Confirm any load derating for your operating conditions with the manufacturer.
The source specification states “Efficiency factor: 0.95@230Vac” without defining the term. This page does not interpret it as conversion efficiency or power factor. The standards listed above are references in the product information; request the applicable documentation if certification evidence is required.
Frequently asked questions
What voltage and power does the JPS400PV5.0 provide?
The listed output is 5.0V with a maximum output power of 400W.
What input range is specified?
The listed input is 100–240Vac at 47–63Hz. Confirm the nameplate details on the unit before installation.
How large is the housing?
The listed dimensions are 235 × 60 × 35mm (L × W × H), with a stated tolerance of ±0.5mm. Mounting-hole spacing is not specified here.
What protection functions are listed?
The product information lists input undervoltage, overload, output short-circuit and overtemperature protection. Trip thresholds are not provided.
Is 80°C an operating temperature for this supply?
No. The listed operating range ends at 50°C. The −40°C to 80°C range refers to storage, and does not establish operation at 80°C.
Product image





Reviews
There are no reviews yet.