RC200 vehicle power with delayed startup
The Sysolution RC200 combines DC conversion for a vehicle LED display with output-delay protection. The linked specification lists low-temperature starting, full-load aging tests and a green power indicator. The three model suffixes identify separate output options, with maximum powers from 168 W to 200 W.
Select the output voltage to match the LED modules before comparing current capacity. Check the 9–36 VDC input range, the startup-delay setting and the mounting arrangement. Natural cooling relies on heat dissipation through the installation, so the manual calls for direct mounting to the system’s metal enclosure.
Technical specifications
| Parameter | Specification |
|---|---|
| Series / application | Sysolution RC200 DC power supply for vehicle LED displays |
| Input voltage | 9–36 VDC |
| Maximum input current | 25 A |
| Switching frequency | 80–100 kHz |
| RC200D4.2 | 4.2 V, 0–40 A, maximum 168 W; full-load efficiency ≥87% |
| RC200D4.5 | 4.5 V, 0–40 A, maximum 180 W; full-load efficiency ≥88% |
| RC200D5 | 5.0 V, 0–40 A, maximum 200 W; full-load efficiency ≥89% |
| Output tolerance | ±3%; respective ranges: 4.07–4.33 V, 4.35–4.65 V and 4.85–5.15 V |
| Ripple and noise | 200 mVp-p maximum |
| Line / load regulation | ±1% / ±2% |
| Startup delay | 12 seconds at 12 VDC, full load; customization is noted in the specification |
| Output rise / hold-up time | 0.1–100 ms rise at 12 VDC full load; at least 10 ms hold-up at 12 VDC, 80% load |
| Cold-start inrush | Less than 100 A |
| Protection | Overcurrent, short circuit, overvoltage, reverse input polarity and overtemperature |
| Overvoltage protection threshold | Above 6.5 V output, hiccup protection |
| Cooling / status | Natural cooling; green LED power indication |
| Operating humidity | 20–90%, non-condensing |
| Storage conditions | −30 to +85 °C; 10–95% RH |
| Unit net weight | 0.25 kg |
| Mounting screws | M3; less than 3.5 mm penetration into the supply |
Product images and specification download

Download specification:
Sysolution RC200 Car LED Display Power Supply Specification(Chinese)
Frequently asked questions
Which RC200 version provides a 5 V output?
RC200D5 is the 5.0 V version, rated for 0–40 A with a maximum output power of 200 W. RC200D4.2 and RC200D4.5 provide different output voltages and are rated at 168 W and 180 W respectively.
What is the RC200 startup delay?
The specification lists a 12-second startup delay at 12 VDC under full load and notes that the delay can be customized. Confirm the supplied delay setting if timing is important to the vehicle display installation.
What input voltage does the RC200 accept?
The documented input range is 9–36 VDC. Match the vehicle supply and wiring to this range and the selected model’s current requirements. This is a DC-input power supply, not a mains AC power supply.
How should the RC200 be cooled and mounted?
The RC200 uses natural cooling. The installation notes call for direct mounting to a metal enclosure for heat dissipation, with M3 screws entering the supply by less than 3.5 mm. The document recommends below 80% load when cooling conditions are poor.
Can I use the series name alone to choose a replacement?
Check the complete suffix as well as the RC200 name. Output voltage differs between RC200D4.2, RC200D4.5 and RC200D5; verify the LED module voltage, required load, connection polarity and startup-delay setting before replacement.








Reviews
There are no reviews yet.