MFN300 multifunction card for LED display control
The NovaStar MFN300 adds power switching, sensor connections and audio output to a display installation. It communicates through RS232 or Gigabit Ethernet. Its timer can replace a separate timer and delay device in the documented system arrangement.
| Parameter | Specification |
|---|---|
| Communication | RS232 serial or Gigabit Ethernet |
| Power-switch control | 8 channels |
| Light-sensor connections | 4 channels for automatic brightness adjustment |
| Environmental functions | Power-distribution-box temperature and humidity detection; temperature/humidity module connection |
| Audio | Audio output |
| Input voltage | DC 3.3–5.5 V |
| Rated current | 0.38 A |
| Rated power consumption | 2.5 W |
| Operating temperature | −20 to +75 °C |
| Operating humidity | 0%–90% RH |
| Dimensions | 144.0 × 94.8 × 20.0 mm |
| Net weight | 164.4 g |
| Board thickness | Approximately 1.6 mm |
The electrical and dimensional figures above follow the retained Rev2.1.0 PDF. Use the documentation for the actual hardware revision when planning a replacement or cabinet installation.
Connection and software configuration
The linked document shows direct RS232 connection to a computer and three Ethernet placements: between the sending card or independent controller and the first receiving card, between two receiving cards, or at the end of the chain.
Its NovaLCT-Mars instructions use the Function Card button to open Function Card Management. From there, a card can be added through its serial or Ethernet connection, renamed and associated with the correct serial port. The PDF contains the original connection diagrams and configuration screenshots.
MFN300 card versus MFN300-B box
The MFN300-B is a separate enclosed product. The MFN300 Rev2.1.0 document specifies a DC 3.3–5.5 V input and four light-sensor connections; the MFN300-B V2.0.4 document specifies AC 100–240 V input and two sensor ports. Do not transfer wiring or electrical ratings between these models simply because their names are similar.
Product images


Download specification
MFN300 multifunction card specifications — Rev2.1.0 (PDF)
Frequently Asked Questions
What is the NovaStar MFN300 used for?
It provides auxiliary LED display functions: eight power-switch control channels, light-sensor connections for brightness adjustment, temperature and humidity functions, a timer and audio output.
How many light sensors can the MFN300 connect?
The linked Rev2.1.0 specification lists four light-sensor connections for automatic brightness adjustment. Check the sensor model and applicable hardware revision before wiring.
How do I connect and configure the MFN300?
Rev2.1.0 shows RS232 connection to a computer or Ethernet placement before, between or after receiving cards. Its configuration instructions use Function Card Management in NovaLCT-Mars to add a card by serial or Ethernet connection.
Can the MFN300 be powered from AC mains like the MFN300-B?
No. The MFN300 card’s linked Rev2.1.0 specification states DC 3.3–5.5 V input. The AC-powered MFN300-B is a different enclosed product with its own wiring and ratings.
Does the MFN300 support temperature and humidity monitoring?
Yes. Rev2.1.0 lists temperature and humidity detection for the power distribution box and connection of a temperature/humidity module. Confirm the module, connections and configuration required by the installation.









Reviews
There are no reviews yet.