A716 receiving card for HUB75E LED cabinets
The Mooncell A716 connects LED cabinet modules through 16 HUB75E interfaces. Its 32 parallel RGB data groups and 1–64 scan support provide the basis for matching the card to a module layout, with AutoLED tools for mapping, image adjustment and diagnostics.
For a calibrated display, size the cabinet using the applicable calibration limit. Cable loop backup, dual power support and customized dual-card backup are separate functions; specify the required arrangement before installation.
Specification reference: the figures below follow the English A716 PDF linked on this page. A separate Chinese A716 specification lists 768 × 256 maximum loading and different calibration limits. Confirm which document applies to the supplied hardware and driver configuration before finalizing a cabinet design.
Technical specifications
| Parameter | Specification |
|---|---|
| Model | Mooncell A716 LED receiving card |
| Module interfaces | 16 × HUB75E |
| Parallel RGB data | 32 groups |
| Maximum loading | 256 × 512 pixels |
| Loading after brightness calibration | 256 × 512 pixels |
| Loading after chromaticity calibration | 160 × 512 pixels |
| Scan modes | 1–64 scan |
| Cascade quantity per network port | ≤1,000 receiving cards |
| Configuration software | Mooncell AutoLED; Mooncell calibration software for pixel-level brightness and chroma calibration |
| Image adjustment | Rotation in multiples of 90° and image scaling through AutoLED |
| Cabinet setup | User-defined output data, complex module arrangement and complex screen connections |
| Diagnostics | Card sequence identification, configuration readback, network cable error-rate detection and communication monitoring |
| Cable backup | Ethernet cable loop backup |
| Dual-card backup | Customized dual receiving-card / dual-circuit backup |
| Power backup | Dual power supplies supported; the manual describes brightness reduction when a power-supply failure is detected |
| Customized monitoring | Voltage, temperature and power-status detection are marked customized |
| Input voltage / rated current | DC 3.5–5.5 V / 0.6 A |
| Rated power | 3 W |
| Operating conditions | −20 to 70°C; 10–90% RH |
| Storage temperature | −25 to 125°C |
| Dimensions / net weight | 144.02 × 91.19 mm / 106.7 g |
Product images and specification download

Mooncell A716 LED Screen Receiving Card Specification
Frequently asked questions
How many HUB75E outputs does the A716 have?
The A716 has 16 HUB75E interfaces and supports 32 groups of parallel RGB data. Check the module scan mode and the connector pinout in the specification before connecting a cabinet.
What is the A716 loading capacity with calibration enabled?
The manual lists 256 × 512 pixels as both maximum loading and loading after brightness calibration. With chromaticity calibration, the listed capacity is 160 × 512 pixels.
Which software configures the receiving card?
Mooncell AutoLED provides cabinet mapping, data-port customization, image rotation and scaling, card identification and configuration readback. Pixel-level brightness and chroma calibration use Mooncell calibration software.
Does the A716 support backup operation?
It supports Ethernet cable loop backup and dual power supplies. Dual receiving-card backup is a customized function. The manual describes reducing screen brightness after detecting a power-supply failure; verify the wiring and configuration for the intended backup mode.
Are voltage and temperature monitoring standard functions?
The specification marks voltage, temperature and power-status detection as customized. Confirm these options for the supplied card if they are required for cabinet monitoring.




Reviews
There are no reviews yet.