4.5V enclosed power supply for LED sign panels
The South Creative NDC500PS4.5 supplies 4.5V DC to LED display modules. It includes PFC and natural air cooling in a compact enclosed housing. For replacement projects, the key selection point is the input-dependent output rating: the model-specific specification lists 80A at 100–180V AC and 100A at 181–240V AC.
Check the mains supply and cabinet temperature before sizing the load. The maximum current is not available across every input voltage or operating temperature.
Technical specifications
| Parameter | Specification |
|---|---|
| Model | NDC500PS4.5 |
| Nominal DC output | 4.5V |
| Output voltage range | 4.4–4.6V DC |
| Output at 100–180V AC input | 4.5V / 80A |
| Output at 181–240V AC input | 4.5V / 100A |
| AC input range | 90–264V AC; observe the input-voltage derating curve |
| Rated AC input range | 100–240V AC |
| Input frequency | 47–63Hz |
| Power factor | ≥0.95 at 220V AC, full load |
| Input current | 6.5A maximum at 220V AC, full load |
| Standby power | 8W maximum at 100–240V AC |
| Ripple and noise | ≤300mV peak-to-peak under the specification’s stated test conditions |
| Efficiency | Up to 90% |
| Operating temperature | −40 to +80°C; derating required from 50 to 80°C |
| Storage temperature | −45 to +85°C |
| Operating relative humidity | 10–90%, non-condensing |
| Cooling | Natural air cooling |
| Dimensions | 235 × 60 × 30 mm |
| Weight | 686g |
Electrical and environmental values above follow the attached NDC500PS4.5 specification, revision V1.1 dated 10 November 2023. Dimensions and weight are retained from this product listing. Consult the PDF for test conditions and derating curves.
Choosing a replacement
Match the LED module voltage, required current, mounting points and terminal arrangement. The specification describes input undervoltage, output overcurrent and output short-circuit protection. Keep space around the housing for natural air cooling and allow for the temperature derating stated in the document.
For a fit check, send LED-Mall the existing supply model and module requirements.
Product image and specification download

Download Specification:
South Creative NDC500PS4.5 LED Display Power Supply Specification
Frequently asked questions
Does the NDC500PS4.5 deliver 100A on a 110V supply?
No. The model-specific specification lists 4.5V/80A for 100–180V AC input and 4.5V/100A for 181–240V AC input. Use the input-voltage derating curve when sizing the load.
What is the DC output voltage?
The nominal output is 4.5V DC, with a specified range of 4.4–4.6V. Match this to the LED module requirements before connecting the display.
Can this power supply operate at 80°C?
The specification lists an operating range of −40 to +80°C, with derating required between 50 and 80°C. This does not mean full-load output is available at 80°C.
Does the NDC500PS4.5 have PFC?
Yes. Its specified power factor is at least 0.95 at 220V AC and full load. That condition matters when comparing it with another power supply.
Where can I download the NDC500PS4.5 specification?
Use the specification download link above for the model-specific PDF. It includes electrical limits, environmental conditions and derating information needed for selection and installation.





Reviews
There are no reviews yet.