MA200PC4.5 power supply for 4.5 V LED modules
The Rong-Electric MA200PC4.5 is a self-cooled LED display power supply with a listed 4.5 V DC output, 40 A current capacity and 90–264 V AC input range. Its 190 × 81.5 × 30 mm housing provides a starting point for checking cabinet fit.
Product parameters
These values are retained from the supplied product information. Conditions not stated in that information are identified rather than assumed.
| Parameter | Specification |
|---|---|
| Model | MA200PC4.5 |
| DC output voltage | 4.5 V |
| Output current | 40 A |
| Input voltage range | 90–264 V AC |
| Efficiency | Up to 90% at 230 V AC input, as listed |
| Ripple and noise | ≤150 mV, as listed; measurement conditions not supplied |
| Operating temperature | −30 to +60°C, as listed |
| Cooling | Self-cooling |
| Dimensions | 190 × 81.5 × 30 mm |
| Protection listed | Input overvoltage, overload and short circuit |
What to check before ordering
Compare the input supply, LED module voltage and required current with the table. Check the mounting holes and terminal layout against the existing unit, and confirm the permitted load at the temperature inside the cabinet.
The original listing references CE, UL, GB4943, EN60950, GB9254 and EN55022A, but does not provide certification documents. If your project requires specific approvals, request the documentation for the exact model and supplied revision before relying on those references.
Product images


Frequently asked questions
What voltage and current does the MA200PC4.5 supply?
The listed output is 4.5 V DC with a 40 A current capacity. Confirm the voltage requirement and load of your LED modules before selecting it.
What AC input range does the MA200PC4.5 accept?
The product listing specifies 90–264 V AC input. Confirm any load derating requirements for your intended input voltage before installation.
Is 90% efficiency guaranteed at every load?
No. The listing states up to 90% efficiency at 230 V AC input. It does not provide a full efficiency curve for other voltages or loads.
Will this power supply fit my cabinet?
The listed dimensions are 190 × 81.5 × 30 mm. Also check mounting-hole spacing, terminal access and cooling clearance against your cabinet; dimensions alone do not establish compatibility.
Can I run the MA200PC4.5 at full load at 60°C?
The listed operating range is −30 to +60°C, but no temperature derating curve is provided here. Confirm the permitted load at your cabinet temperature before using the upper limit as a full-load condition.





Reviews
There are no reviews yet.