A5s Plus-N Mini Receiving Card
This product is supplied as the NovaStar A5s Plus-N. It uses high-density connectors for LED cabinet integration and supports calibration, color management and image adjustment.
Documentation note: The original download supplied with this listing identifies A5s Plus, not A5s Plus-N. The table below preserves the values stated in the existing A5s Plus-N product listing; they have not been independently verified in a separate Plus-N manufacturer specification. Voltage, dimensions, weight and cross-model interchangeability are not established by that document.
| Parameter | Specification |
|---|---|
| Listed maximum loading capacity | 512 × 384 pixels; NovaLCT V5.3.1 or later required |
| Listed data groups | Up to 32 parallel RGB groups or 64 serial groups; expandable to 128 serial groups |
| Connection type | High-density connectors |
| Listed image rotation | 0°, 90°, 180° and 270° |
| RGB Gamma software condition | NovaLCT V5.2.0 or later and a controller supporting the function |
| Listed low-latency condition | One frame at the receiving-card end, only with driver ICs containing built-in RAM |
Calibration and Image Adjustment
The existing listing describes color management, 18bit+ and pixel-level brightness and chroma calibration with NovaLCT and NovaCLB. Dark or bright lines at module and cabinet joins can be adjusted. It specifies NovaLCT V5.2.0 or later for making those adjustments without changing the video source.
Individual red, green and blue Gamma adjustment requires a supporting controller. The listed 3D function likewise requires a controller that supports 3D. Retain these system requirements when choosing the control equipment.
Replacement and Setup Checks
Use the A5s Plus-N marking when identifying the supplied card. The A5s Plus PDF is retained as the original reference, but it does not establish that Plus and Plus-N can be substituted without checking the hub-board pinout, module configuration and firmware.
The stated one-frame low-latency condition applies to the receiving-card stage with suitable driver ICs. It is not a measurement of the full source-to-screen signal chain.
Frequently Asked Questions
Which model is this product supplied as?
The supplied model is A5s Plus-N. The download originally attached to the listing is titled A5s Plus, so its model identification is different.
What pixel capacity is listed for A5s Plus-N?
The existing product listing states up to 512 × 384 pixels with NovaLCT V5.3.1 or later. A separate Plus-N manufacturer specification has not been verified for this page.
What is required for the listed low-latency function?
The existing listing specifies driver ICs with built-in RAM and a one-frame latency at the receiving-card end. It does not give an end-to-end latency figure.
Does the card provide 3D and RGB Gamma on its own?
No. The listing requires a compatible controller for these functions. RGB Gamma adjustment also requires NovaLCT V5.2.0 or later.
Can I use the A5s Plus PDF to confirm a Plus-N replacement?
Not by itself. The PDF is for A5s Plus. Confirm the supplied card marking, hub-board pinout, module configuration and firmware before treating the two models as interchangeable.
Original Product Images



Original Specification Reference
Original A5s Plus specifications V1.1.1 — document model differs from A5s Plus-N








Reviews
There are no reviews yet.