B875 Receiving Card for Fine-Pitch LED Displays
The NovaStar B875 connects the LED control system to display modules through eight HUB75E connectors. A single card supports a maximum load of 512 × 512 pixels and up to 16 groups of parallel RGB data. Check the module pinout and cabinet wiring against the original specification when selecting a replacement.
| Parameter | Specification |
|---|---|
| Maximum loading capacity | 512 × 512 pixels |
| Module connectors | 8 × HUB75E |
| Parallel RGB data | Up to 16 groups |
| Input voltage | 3.3–5.5 V DC |
| Rated current / power consumption | 0.5 A / 2.5 W |
| Dimensions | 92.0 × 121.4 × 16.8 mm |
| Net weight | 71.2 g per receiving card |
| Operating environment | −20°C to +70°C; 10–90% RH, non-condensing |
| Storage environment | −25°C to +125°C; 0–95% RH, non-condensing |
| Image rotation | 0°, 90°, 180° or 270° |
Calibration, Gamma and 3D Requirements
B875 supports pixel-level brightness and chroma calibration with NovaLCT and a calibration platform; the specification recommends CalCube MiniLED V1.1.0 or later. Color management, 18bit+ and quick calibration-coefficient upload are also documented. Dark or bright lines at module and cabinet joins can be adjusted.
Individual red, green and blue Gamma adjustment requires NovaLCT V5.2.0 or later and a sending card that supports the function. For 3D image output, the sending card must also support 3D. These are system-dependent functions, not capabilities supplied by the receiving card alone.
Maintenance and Backup
Mapping displays the receiving-card number and Ethernet-port information on the cabinet. Temperature and voltage monitoring work without peripherals. Configuration readback, firmware readback, bit-error detection and a configurable pre-stored image support maintenance; firmware readback and bit-error detection require NovaLCT V5.2.0 or later.
Loop backup uses primary and backup connections between the sending and receiving cards. Dual configuration storage and dual program backup provide recovery options. The PDF includes HUB75E pin definitions, grounded mounting-hole details and indicator patterns for wiring and diagnostics.
Frequently Asked Questions
What is the maximum B875 loading capacity?
The V1.1.1 specification lists a maximum of 512 × 512 pixels for one B875 receiving card.
How many HUB75E connectors does B875 have?
It has eight HUB75E connectors and supports up to 16 groups of parallel RGB data. Check the PDF pin definitions against the LED module before connecting it.
Can B875 rotate the LED image?
Yes. It supports image rotation in 90° increments: 0°, 90°, 180° and 270°.
What is required for individual RGB Gamma adjustment?
Use NovaLCT V5.2.0 or later together with a sending card that supports individual RGB Gamma adjustment.
Does B875 support 3D without a compatible sending card?
No. The documented 3D function requires a sending card that also supports 3D image output.




Reviews
There are no reviews yet.