Mooncell MVB10E 2-in-1 LED Video Processor
$ 693.00
Mooncell MVB10E integrates video processing and LED sending with ten Gigabit outputs, 6.5 million pixels of capacity and four-picture display. Confirm the input timing and output-width limits because the linked specification contains conflicting descriptions.
999 in stock
MVB10E four-picture processing and LED sending
The Mooncell MVB10E combines video splicing, processing and LED sending in one unit. Its ten Gigabit Ethernet outputs support a total of 6.5 million pixels, with four simultaneous pictures that can be overlaid, moved, cropped and scaled.
Two source discrepancies affect selection. The feature list advertises 4K at 60 Hz, but the input table lists only 1920 × 1080 and 3840 × 540 at 60 Hz. The stated maximum width also differs between the feature text and basic table. Those differences remain visible below, so a source format or screen layout is not presented as supported without confirmation.
Technical specifications
| Parameter | Specification |
|---|---|
| Model | Mooncell MVB10E 2-in-1 LED video processor |
| LED outputs | 10 × RJ45 Gigabit Ethernet; 1000BaseTX |
| Loading capacity | 6.5 million pixels total; 650,000 pixels per port |
| Output-dimension conflict | The feature text says both width and height can reach 8192 pixels. The basic table instead lists highest 8192 and widest 3840. Confirm the applicable width limit; total pixel capacity still applies. |
| Simultaneous pictures | 4; overlay, roaming and scaling |
| Inputs in detailed interface table | 1 × DVI, 2 external HDMI inputs, 1 built-in HDMI input and 1 × DP |
| Input-format conflict | The feature list claims 4K at 60 Hz. The detailed table lists 1920 × 1080/60 Hz and 3840 × 540/60 Hz for every DVI, HDMI and DP input. No connector-specific 3840 × 2160/60 Hz mode is established by that table. |
| EDID | Custom EDID listed for DVI, HDMI and DP |
| Window operations | Source switching and scaling; crop, partial enlargement, adjustable position and size |
| Scene and display controls | Template recall, partial/full-screen control, black screen and engineering time lock |
| Audio | 1 × 3.5 mm input and 1 × 3.5 mm output |
| Receiver support | Mooncell receiving-card series and multifunction cards |
| USB setup | Sending-card configuration connection for AutoLED; separate USB UPDATE port |
| Other control interfaces | RS232; LAN1 100 Mbps communication interface marked reserved |
| SD card | Storage of screen configuration parameters for data inspection |
| Input power / rated power | 100–240 VAC, 50/60 Hz; 25 W |
| Operating environment | 0–45°C; 10–90% RH, non-condensing |
| Dimensions / net weight | 482.6 × 300.3 × 66.7 mm (L × W × H); 5 kg |
Product images and specification download
Mooncell MVB10E 2-in-1 Led Video Processor Series Specification
Frequently asked questions
Does Mooncell MVB10E accept 4K at 60 Hz?
The feature list says 4K at 60 Hz, but the detailed input table only lists 1920 × 1080/60 Hz and 3840 × 540/60 Hz for each connector. Confirm a connector-specific timing specification for the supplied revision before relying on 3840 × 2160/60 Hz input.
What are the output width and height limits?
The sources conflict on width: the feature text gives 8192 pixels for both dimensions, while the basic table says maximum height 8192 and width 3840. Confirm the required layout against the actual revision, keeping the total within 6.5 million pixels and each port within 650,000.
How many pictures can MVB10E display?
The original listing and PDF both state four simultaneous pictures, with overlay, roaming, scaling, crop and partial enlargement.
Are all three HDMI inputs external connectors?
The detailed interface table identifies HDMI1, HDMI2 and a separate built-in HDMI path. It does not describe three external HDMI sockets. Check the supplied configuration if the built-in source is required.
Can LAN1 be counted as an extra LED output?
No. The PDF identifies ten Gigabit Ethernet LED outputs and separately lists LAN1 as a reserved communication interface. LAN1 is not documented as an additional LED sending output.
| Weight | 5.6 kg |
|---|
Be the first to review “Mooncell MVB10E 2-in-1 LED Video Processor”
You must be logged in to post a review.
Will I be charged with customs and taxes?
The prices displayed on our site are tax-free (in US Dollars), which means you may be required to pay import duties and taxes once you receive your order. Import taxes, duties, and related customs fees will be determined by your local customs office when your order arrives at its final destination.
Please note that these additional charges and taxes are your responsibility, and we do not take any responsibility for them. We are not liable for paying or reimbursing any customs duties, taxes, or related fees. For more details on these charges, please contact your local customs office.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations..
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound..
Returns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.)..
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item..
Related products
Reviews
There are no reviews yet.