HD-R512 Full-Color LED Receiving Card
The R512 receives display data through Gigabit Ethernet and connects to LED modules through 12 HUB75E ports. It works with common driver IC modules and most PWM IC modules. The sender list below helps identify supported Huidu controller families.
| Parameter | Specification |
|---|---|
| Recommended loading | 256 × 256 pixels |
| Module-width limits | Outdoor ≤256 pixels; indoor ≤128 pixels |
| Module interfaces | 12 × HUB75E |
| Network interfaces | 2 × 1 Gbps Ethernet; interchangeable |
| Module type | Common IC modules and most PWM IC modules |
| Scan range | Static to 1/64 scan |
| Grayscale | 256–65536 |
| Multi-card connection | Receiving cards may be placed in any sequence |
| Cable distance | Within 146 m using Super Cat5 or Cat6 cable |
| Power interfaces | 2 × 5 V DC; connect either power interface |
| Input voltage — parameter table | 4–6 V |
| Power-interface voltage — connection description | 4.5–5.5 V DC |
| Working temperature — original listing | −40°C to 85°C |
| Power — PDF page 2 | 5 W |
| Rated voltage — PDF page 5 | Minimum 4.2 V; typical 5.0 V; maximum 5.5 V |
| Working temperature — PDF page 5 | Minimum −40°C; typical 25°C; maximum 80°C |
Compatible Senders and Processors
- Dual-mode players: A4, A5, A6, A601, A602 and A603.
- Asynchronous controllers: A3, A30, A30+, C10, C10C, C30, C15, C15C, C35 and C35C.
- Synchronous controllers: T901, T901B and T901S.
- Video processors: VP210 and VP410.
Connection and Display Checks
Either Gigabit port can connect to the sender or another receiving card. D1 flashes during normal operation; rapid D2 flashing indicates that Gigabit has been recognized and data is arriving. The card also provides connections for external run and data indicators.
Use the integrated test button to check brightness uniformity and module flatness. Smart settings configure the screen-unit alignment. The original listing and the PDF give different voltage ranges and working-temperature limits, identified separately above. The specification recommends a standard 5 V supply. Confirm the limits applicable to the supplied hardware before installation.
Product Images


Specification Download
Download the HD-R512 specification (PDF)
Frequently Asked Questions
What is the HD-R512 recommended pixel load?
The recommended load is 256 × 256 pixels. Outdoor module width is limited to 256 pixels, and indoor module width to 128 pixels.
How many HUB75E ports are on the R512?
HD-R512 has 12 HUB75E module interfaces, together with two 1 Gbps Ethernet ports.
Can either Ethernet port connect to the sending card?
Yes. The two Gigabit Ethernet ports are interchangeable for connections to the sending card or another receiving card.
What do the R512 status LEDs indicate?
D1 flashing indicates normal operation. D2 flashing rapidly indicates that Gigabit has been recognized and data is being received.
Does HD-R512 support 1/64 scan?
Yes. The listed scan range is static to 1/64 scan, with support for common IC modules and most PWM IC modules.







Reviews
There are no reviews yet.