Mooncell MTB2000E 4K LED Master Controller
$ 1,070.07
Mooncell MTB2000E receives 4K60 video through HDMI 2.0 or DP 1.2 and provides twenty Gigabit LED outputs, backup functions and 3D-LUT. Its PDF gives conflicting 10.40- and 10.04-million-pixel capacities; confirm the applicable limit.
999 in stock
MTB2000E 4K LED sending and image control
The Mooncell MTB2000E is an LED master controller for stage, conference, event and exhibition systems. It accepts HDMI 2.0 and DP 1.2 video up to 3840 × 2160 at 60 Hz and provides twenty Gigabit Ethernet outputs, with configuration readback, transmission backup, 3D-LUT and zoom listed among its functions.
The linked PDF needs two qualifications for system planning. Its total capacity differs between the basic and Ethernet-output tables, and its fiber/HDMI-loop feature claims are not accompanied by detailed interface specifications. The table identifies these source limitations rather than guessing the intended values.
Technical specifications
| Parameter | Specification |
|---|---|
| Model | Mooncell MTB2000E master controller |
| Video / audio inputs | 1 × DP 1.2, 1 × HDMI 2.0 and 1 × 3.5 mm audio input |
| Documented video mode | DP and HDMI: up to 3840 × 2160 at 60 Hz |
| Source width / height | The input descriptions separately list maximum graphics-card width and height of 7680 pixels; no combined 7680 × 7680 timing is specified. |
| LED Ethernet outputs | 20 Gigabit Ethernet outputs |
| Total-capacity discrepancy | The basic table states 10.40 million pixels; the detailed Ethernet-output table states 10.04 million. Confirm the applicable unit capacity for the supplied revision. |
| Per-port capacity | 650,000 pixels for an 8-bit input source |
| Whole-unit loading range | Width 128–8192 pixels and height 64–8192 pixels, subject to the confirmed total pixel limit |
| Other loading-range entry | The basic table separately lists width 128–4096 and height 64–4096 without explicitly identifying the scope of those rows. |
| Image shift | Horizontal and vertical ranges: 0–8192 pixels |
| Fiber and HDMI loop claims | The feature list specifies 4 bidirectional duplex optical-fiber ports and 1 HDMI loop output. The detailed output table only describes Ethernet; optical parameters and loop timing are not supplied. |
| Frame rates | 30, 50, 60 and 120 Hz compatibility listed generally; the documented 4K mode is 60 Hz |
| Control | USB PC connection, RS232 DB9 and 100 Mbps LAN |
| Backup | Ethernet-port loop dual backup and dual master-controller backup |
| Monitoring / readback | Sending-card operating parameters/status, configuration readback and Gigabit network error-rate detection |
| Image functions | 3D-LUT and zoom are listed in the feature section. |
| 3D qualification | Active 3D is listed; the transmitter port is reserved and requires customization. |
| Power | 100–240 VAC, 50/60 Hz; rated 70 W |
| Environment | −20 to 70°C; 10–90% RH, non-condensing |
| Dimensions / net weight | 487 × 365 × 89 mm (L × W × H); 6.2 kg |
Product images and specification download
Mooncell MTB2000E Master Controller Specification
Frequently asked questions
Does MTB2000E support 4K at 60 Hz?
The input table lists 3840 × 2160 at 60 Hz for both HDMI 2.0 and DP 1.2. The general mention of 120 Hz does not establish a 4K 120 Hz mode.
Is the total capacity 10.40 or 10.04 million pixels?
Both numbers appear in the same PDF: 10.40 million in the basic table and 10.04 million in the Ethernet-output table. This difference is unresolved and should be checked against the supplied hardware and firmware before final screen sizing.
Does each Ethernet output support 650,000 pixels?
The detailed interface table gives this limit specifically for an 8-bit input source. Do not assume the same capacity at another bit depth without a matching specification.
What fiber connection details are confirmed?
The feature list states four bidirectional duplex optical-fiber ports, but the detailed output table does not document fiber connectors, modules, distance or rate. Confirm those details for the actual unit and optical link before installation.
Are 3D and backup functions included in the specification?
The PDF lists loop backup and dual master-controller backup. It also lists active 3D, while qualifying the transmitter port as reserved and requiring customization. Check the enabled 3D configuration separately from the backup functions.
| Weight | 7.2 kg |
|---|
Be the first to review “Mooncell MTB2000E 4K LED Master Controller”
You must be logged in to post a review.
Will I be charged with customs and taxes?
The prices displayed on our site are tax-free (in US Dollars), which means you may be required to pay import duties and taxes once you receive your order. Import taxes, duties, and related customs fees will be determined by your local customs office when your order arrives at its final destination.
Please note that these additional charges and taxes are your responsibility, and we do not take any responsibility for them. We are not liable for paying or reimbursing any customs duties, taxes, or related fees. For more details on these charges, please contact your local customs office.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations..
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound..
Returns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.)..
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item..
Related products
Reviews
There are no reviews yet.