NovaStar NV7516 受信カード
NovaStar NV7516は、16個の標準HUB75Eコネクタを備え、最大32グループの並列RGBデータをサポートする汎用LEDディスプレイ受信カードです。LEDディスプレイシステム向けに、キャビネットキャリブレーション、色調整、診断機能を提供します。
実際のドライバICとビデオビット深度に合わせて、読み込み解像度を選択してください。8ビットソースと10ビットソースでは、同じカードであっても制限が異なります。
技術仕様および耐荷重制限
Maximum loading per card at 60 Hz
| ドライバIC | 8ビットソース | 10ビットソース |
|---|---|---|
| PWM | 512×512 | 512×256 |
| 全般 | 512×384 | 512×192 |
These are the total limits for one receiving card, shared across its HUB75E outputs. The 16 connectors do not each provide the full card resolution. Confirm the module scan configuration and data-group requirements as well as the cabinet pixel count.
| 製品仕様 | |
|---|---|
| モジュールの出力 | 16 × 標準 HUB75E |
| 並列RGBデータ | 最大32グループ |
| 入力電圧 | DC3.8V~5.5V |
| 定格電流/電力 | 0.5A / 2.5W |
| 動作温度/湿度 | −20℃~+70℃ / 10%RH~90%RH(結露なきこと) |
| 保存温度/湿度 | −40℃~+85℃ / 0%RH~95%RH(結露なきこと) |
| 寸法/正味重量 | 91.5 × 145.6 × 19.3 mm / カード1枚あたり101.9 g |
電流と消費電力は、構成、環境、使用状況によって変動する場合があります。コネクタのピン配置と取り付け図については、PDFファイルを参照してください。
Connect the Sender, Receiving Card and LED Modules
The NV7516 receives display data from a compatible sending card through its Gigabit Ethernet ports, then connects to LED modules through the 16 HUB75E connectors. The two Ethernet ports support input/output in either direction and can cascade other receiving cards. This receiving card needs a compatible upstream sending system; it is not a standalone media player.
Supply the card with DC 3.8–5.5 V. Its rated 2.5 W consumption is for the receiving card, so calculate the LED module power separately. For cabinet integration, use the connector pinouts and mounting drawing in the linked specification.
ディスプレイ調整
カラーマネジメント機能は、Rec.709、DCI-P3、Rec.2020、およびカスタム色域に対応しています。NV7516は、18ビット以上の解像度、NovaStarキャリブレーションシステムによるピクセルレベルの輝度および色度キャリブレーション、クイックシーム調整、マルチバッチ調整にも対応しています。
受信カードの1フレーム遅延を実現するには、RAM内蔵のモジュールドライバICが必要です。3D出力には対応コントローラが必要で、独立したRGBガンマ調整には対応コントローラとNovaLCTの両方が必要です。画像の回転は90°刻みで行えます。
マッピング、監視、バックアップ
キャリブレーション係数は、アップロード、読み出し、保存、消去が可能です。データグループマッピングとマッピング1.1は、データグループ、コントローラ、イーサネットポート、受信カードの位置を識別します。保存された画像は、起動時、イーサネット切断時、またはビデオソースの喪失時に設定できます。
メンテナンス機能には、温度および電圧監視、キャビネットLCDサポート、ビットエラー検出、イーサネット切断回数カウント、ファームウェア読み出し、構成読み出しが含まれます。ループバックアップはプライマリケーブルとバックアップケーブルを使用し、デュアルプログラムバックアップは復旧用に2つのファームウェアコピーを保存します。
Check Before Ordering or Replacing a Card
- Confirm the cabinet width and height in pixels, module driver IC, scan configuration, and whether the video source is 8-bit or 10-bit.
- Check the 16 HUB75E connections and up to 32 parallel RGB data groups against your module wiring and configuration.
- Confirm the sending controller, firmware and NovaLCT configuration needed for the intended features. One-frame latency and 3D have the conditions described above.
- Check the 91.5 × 145.6 × 19.3 mm card dimensions, mounting clearances and DC input before installation. A matching connector count alone does not establish replacement compatibility.
Send your cabinet layout, module IC and controller model for NV7516 selection assistance、または閲覧 NovaStar制御製品.
製品画像と仕様

Download NV7516 specification V1.0.2 — June 23, 2026 (Chinese PDF)
よくある質問
NV7516にはHUB75Eコネクタがいくつありますか?
16個の標準HUB75Eコネクタを備え、最大32個の並列RGBデータグループをサポートします。
NV7516の8ビットソースにおける最大解像度はどれくらいですか?
60Hzの場合、PWMドライバICを使用した場合は512×512ピクセル、汎用ドライバICを使用した場合は512×384ピクセルとなります。
10ビットのソースを使用すると、NV7516のロード容量は変化しますか?
はい。60Hzの場合、10ビットソースはPWMドライバICを使用した場合、最大512×256ピクセル、汎用ドライバICを使用した場合、最大512×192ピクセルまで対応します。
低遅延かつ3D動作を実現するには何が必要ですか?
受信側カードでの1フレーム遅延を実現するには、RAM内蔵のドライバICが必要です。3D出力には、3D対応コントローラが必要です。
マッピング1.1は何を表示しますか?
筐体上のコントローラ、イーサネットポート、受信カードの番号が表示され、イーサネットポートには異なる色のテキストが使用されているため、物理的な位置と配線を識別しやすくなっています。
Is the maximum resolution per HUB75E connector or per card?
The loading limits apply to the whole receiving card. For example, 512 × 512 at 60 Hz applies to one NV7516 with a PWM driver IC and an 8-bit source, across its outputs together.
Can the NV7516 play videos without a sending controller?
The NV7516 is a receiving card, not a standalone media player. Its Gigabit Ethernet ports connect to a sending card and other receiving cards; HUB75E outputs connect to LED modules.





レビュー
口コミはまだありません。