Colorlight K8 Receiving Card for Fine-Pitch LED Cabinets
The Colorlight K8 is a compact LED receiving card for fine-pitch fixed installations and rental cabinets. It supports up to 32 parallel data groups or 64 serial data groups, with calibration, image adjustment and redundancy features for cabinet-level display control.

Product Parameters and Functions
| 參數 | 規格 |
|---|---|
| 型號 | K8 |
| 產品類別 | LED接收卡 |
| Parallel / serial data | Up to 32 parallel groups or 64 serial groups |
| 視訊源位深度 | 8-bit / 10-bit; maximum 10-bit input and output in the linked V1.0.2 specification |
| 顯示功能 | HDR, full gamma adjustment, Infi-bit color extension and low latency |
| 校準 | Per-pixel brightness and chromaticity calibration |
| 圖像調整 | Color temperature, grayscale refinement and improved grayscale at low brightness |
| 模組管理 | 8-way support for up to 16 intelligent modules |
| 保養 | Seam correction, highlight/OSD, screen rotation and prestored picture |
| 監控 | 機櫃溫度、濕度、電壓和功率監測 |
| 冗餘 | 迴路冗餘、雙接收卡熱備份和電源冗餘 |
整合與維護
Check the cabinet hub board, connector pinout, LED driver IC and scan configuration before choosing a receiving card. Parallel and serial data-group counts describe output organization; they do not by themselves determine the usable cabinet pixel resolution.
The K8 supports configuration-parameter and calibration-coefficient redundancy, along with firmware redundancy and readback. It also supports firmware upgrades without a power restart and Ethernet cable status monitoring. These functions should be configured with the compatible controller, cabinet hardware and software.
常見問題
Is the Colorlight K8 a sending card or receiving card?
The K8 is a receiving card installed within an LED display system. It is used with a compatible sending controller and cabinet interface.
How many data groups does the K8 support?
It supports up to 32 parallel data groups or 64 serial data groups. Match the selected output mode to the cabinet hub board and LED module configuration.
Can I replace another receiving card with a K8 directly?
Do not assume it is a direct replacement based on appearance. Check connector pinout, hub-board compatibility, driver IC, scan settings, firmware and the existing cabinet configuration before replacing a card.
Does the K8 support per-pixel calibration and backup?
Yes. It supports brightness and chromaticity calibration per pixel, loop redundancy and dual receiving-card hot backup. The required system connections and settings must also be configured.






過去評論
尚未有評論。