The Xixun D10-270 receives display data for a full-color LED panel. Xixun specifies 24 output data groups and a single-card resolution of 256 × 226 pixels. Use the JH1 and JH2 pin definitions in the specification when matching the receiving card to a module.
Xixun D10-270 receiving card specifications
| Параметр | Параметр |
|---|---|
| Output data mode documented by Xixun | 24 групп |
| Разрешение одной карты | 256 × 226 пикселей |
| Рабочее напряжение | 3.3-5.5 V |
| Рабочая температура окружающей среды | От −20 до +60 ° C |
| мониторинг | Температура, состояние связи по кабелю Ethernet и напряжение питания. |
| Конфигурация | Readback of configuration files and pre-stored picture settings |
| Поддержка дисплея | Высокое качество оттенков серого и высокая частота обновления |
Часто задаваемые вопросы
1. Is a 28-group output pinout available in the specification?
The original product listing mentions 28 groups for certain scan and decoder configurations. The linked Xixun specification gives a 24-group pinout only. Confirm the board revision and module decoder before designing for 28 groups.
2. Can I retrieve an existing card configuration?
Yes. The D10-270 supports configuration file readback, and its module memory can store calibration coefficients and module information.
3. How do I check the Ethernet link and supply voltage?
The card supports Ethernet communication status detection and supply voltage detection. The specification also identifies the indicator connections on J7.
Спецификация приемной карты миниатюрной светодиодной панели XIXUN D10-270


Отзывы
Пока еще нет отзывов.