Huidu HD-R3210 at a glance
その フイドゥ HD-R3210 is an LED receiving card for synchronous and asynchronous control systems. It offers 10個のオンボードHUB320Fインターフェース, 40 parallel RGB data groups or 120 serial data groups, and Gigabit Ethernet communication.
The specification table lists a maximum load of 512×512ピクセル、60Hz; usable loading depends on the module resolution and interfaces used.
Check the module layout before selecting a card
The specification overview describes capacity as up to 260,000 pixels, while its table gives 512 × 512 pixels at 60 Hz. Treat these as the document’s rounded overview and tabulated maximum, rather than separate capacity modes. Confirm the planned module layout and sender configuration before calculating card quantities.
HD-R3210 connections and loading
| 仕様/機能 | |
|---|---|
| モデル | Huidu HD-R3210 (R3210) LEDディスプレイ受信カード |
| 制御システム | 同期式および非同期式LEDディスプレイ制御システム |
| モジュールインターフェース | 10個の標準HUB320Fインターフェースを搭載 |
| データ出力 | 40グループの並列RGBデータ、または120グループの直列データ |
| サポートされている送信タイプ | デュアルモード送信ボックス、非同期送信カード、同期送信カード、およびHuidu VPシリーズビデオプロセッサ |
| サポートされているモジュール | 一般的なドライバICモジュールとほとんどのPWMドライバICモジュール。選択前に具体的なモジュールとICを確認してください。 |
| 走査法 | 静止状態から1/128スキャンまで対応。ポイント抽出と空ポイント設定をサポート。仕様書には、138シリーズのデコードでは1/8スキャン以上はサポートされないと記載されている(138、5166、5266、2012、2013、7258、32019)。 |
| 通信方法 | ギガビットイーサネット |
| 最大積載量 | 512×512ピクセル、60Hz。実際の負荷はモジュールの解像度と使用するインターフェースによって異なります。 |
| Module configuration reference | P1.25 modules × 8; ≥ P1.5 modules × 10, as listed in the specification. Confirm the actual module dimensions and resolution. |
Configuration, correction and monitoring
| 仕様/機能 | |
|---|---|
| マルチカード接続 | 受信カードは任意の順序で配置でき、Huiduが指定するナノ秒レベルの同期が実現する。 |
| グレースケール | 256~65,536レベル |
| スマート設定 | スマートな構成と画面レイアウト設定により、さまざまなモジュール配置に対応 |
| テスト機能 | ディスプレイの輝度均一性とLEDモジュールの平坦性を確認するための内蔵スクリーンテスト |
| 通信距離 | マニュアルに記載されているとおり、Super Cat5またはCat6ネットワークケーブルを使用して80m以内で使用してください。 |
| 画像回転 | 0°、90°、180°、270° |
| ポイントごとの修正 | グレースケール補正システムと連携し、ポイントごとの明るさと色の補正、明暗線の調整、継ぎ目の補正を行います。 |
| 独立したRGBガンマ調整 | 低階調性能の不均一性やホワイトバランスのずれに対処するため、R、G、Bの各ガンマ値を個別に調整します。 |
| モジュールフラッシュ | 補正係数は、フラッシュメモリを搭載したモジュールに保存および読み出すことができます。 |
| 事前に保存された画面 | 電源投入時、ネットワークケーブル切断時、映像ソース信号なしなどの状況下で、あらかじめ設定された画面を表示します。 |
| 監視機能 | 外部機器を使用せずに受信カード自体の温度と電圧を監視し、動作時間を記録します。 |
| 設定パラメータのバックアップ | パラメータはファクトリー領域に保存でき、変更後にその領域から復元できます。 |
| プログラムのバックアップ | 異常なプログラム更新によるフリーズを防ぐため、出荷前に受信カードに2つのファームウェアプログラムが保存されています。 |
互換性チェックリスト
- Match the module’s HUB320F connection and pinout.
- Check the driver IC, decoding method and scan ratio.
- Calculate the pixel load and number of interfaces required for each cabinet.
- Confirm compatibility with the sending card, sending box or VP-series processor in the system.
- For a replacement, compare the existing card and retain the correct screen configuration.
Scan compatibility needs a separate check. Static to 1/128 scan support does not establish compatibility with every module. The supplied specification states that 138-series decoding does not support 1/8 scan or above, listing 138, 5166, 5266, 2012, 2013, 7258 and 32019. Confirm the actual module with our team before ordering.
ブラウズ LED受信カードシリーズ if your module needs a different interface.
Original HD-R3210 product image

仕様のダウンロード
HD-R3210 Product Specifications V1.0 (PDF)
Check the matching document, actual board revision and module configuration for installation decisions.
よくある質問
How many HUB interfaces does the HD-R3210 have?
It has 10 onboard HUB320F interfaces. Match the connector, pinout and LED module configuration before choosing a receiving card.
Is 512 × 512 pixels a guaranteed load for every module?
No. The specification lists a maximum of 512 × 512 pixels at 60 Hz, while its overview uses the rounded figure of 260,000 pixels. Actual loading depends on the interfaces used and module resolution.
Can it work with synchronous and asynchronous systems?
The specification supports both types of LED display control system, including supported Huidu sending cards, dual-mode sending boxes and VP-series video processors. Confirm the particular sender and configuration.
Does static to 1/128 scan mean every driver IC is supported?
No. Check the module driver IC and decoding method. The specification includes a separate restriction for 138-series decoding; do not infer compatibility from the general scan range alone.
What information should I send before ordering?
Send the LED module resolution, HUB connection and pinout, driver IC, scan method, cabinet layout and sending-device model. For a replacement, include photos of the existing receiving card.
Need help matching your receiving card?
Send module photos, driver-IC details, pixel dimensions and the sending-device model through WhatsApp または当社の コンタクトページ for compatibility assistance.
Product listing reviewed on 16 November 2026 by LED-Mall. Specifications follow the linked product document; actual loading depends on system configuration.




レビュー
口コミはまだありません。