Huidu HD-R3210 at a glance
El Huidu HD-R3210 is an LED receiving card for synchronous and asynchronous control systems. It offers 10 interfaces HUB320F integradas, 40 parallel RGB data groups or 120 serial data groups, and Gigabit Ethernet communication.
The specification table lists a maximum load of 512 × 512 píxeles a 60 Hz; usable loading depends on the module resolution and interfaces used.
Check the module layout before selecting a card
The specification overview describes capacity as up to 260,000 pixels, while its table gives 512 × 512 pixels at 60 Hz. Treat these as the document’s rounded overview and tabulated maximum, rather than separate capacity modes. Confirm the planned module layout and sender configuration before calculating card quantities.
HD-R3210 connections and loading
| Parámetro | Especificación / función |
|---|---|
| Modelo | Tarjeta receptora con pantalla LED Huidu HD-R3210 (R3210) |
| Sistemas de control | Sistemas de control de pantallas LED síncronos y asíncronos |
| Interfaces de módulos | 10 interfaces HUB320F estándar integradas |
| Salida de datos | 40 grupos de datos RGB paralelos o 120 grupos de datos en serie |
| Tipos de envío admitidos | Caja de envío de modo dual, tarjeta de envío asíncrona, tarjeta de envío síncrona y procesador de vídeo Huidu serie VP. |
| Módulos compatibles | Módulos IC de controlador comunes y la mayoría de los módulos IC de controlador PWM; confirme el módulo y el IC específicos antes de seleccionarlos. |
| método de digitalización | Estático a escaneo 1/128; admite extracción de puntos y configuración de puntos vacíos. La especificación indica que la decodificación de la serie 138 no admite escaneo 1/8 o superior (138, 5166, 5266, 2012, 2013, 7258, 32019). |
| Método de comunicación | Gigabit Ethernet |
| Capacidad de carga máxima | 512 × 512 píxeles a 60 Hz; la carga real depende de la resolución del módulo y de las interfaces utilizadas. |
| Module configuration reference | P1.25 modules × 8; ≥ P1.5 modules × 10, as listed in the specification. Confirm the actual module dimensions and resolution. |
Configuration, correction and monitoring
| Parámetro | Especificación / función |
|---|---|
| Conexión multitarjeta | Las tarjetas receptoras se pueden organizar en cualquier orden, con sincronización a nivel de nanosegundos según lo especificado por Huidu. |
| Escala de grises | 256-65,536 niveles |
| Configuraciones inteligentes | La configuración inteligente y los ajustes de diseño de pantalla admiten diferentes disposiciones de módulos. |
| Función de prueba | Prueba de pantalla integrada para comprobar la uniformidad del brillo de la pantalla y la planitud del módulo LED. |
| Distancia de la comunicación | Dentro de un radio de 80 m utilizando cable de red Super Cat5 o Cat6, como se especifica en el manual. |
| Rotación de la imagen | 0°, 90°, 180° y 270° |
| Corrección punto por punto | Funciona con un sistema de corrección de escala de grises para la corrección de brillo y color punto por punto, ajuste de líneas claras/oscuras y corrección de costuras. |
| Ajuste gamma RGB independiente | Ajuste gamma independiente para R, G y B para corregir el rendimiento desigual en escala de grises baja y la desviación del balance de blancos. |
| Módulo Flash | Los coeficientes de corrección se pueden almacenar y consultar en módulos equipados con memoria Flash. |
| Pantalla preguardada | Muestra una pantalla preestablecida en condiciones como encendido, cable de red desconectado o ausencia de señal de fuente de vídeo. |
| Función de seguimiento | Supervisa la temperatura y el voltaje de la tarjeta receptora sin necesidad de equipos externos y registra el tiempo de funcionamiento. |
| Copia de seguridad de los parámetros de configuración | Los parámetros se pueden guardar en un área de fábrica y restaurarse desde esa área después de realizar cambios. |
| Copia de seguridad del programa | Se almacenan dos programas de firmware en la tarjeta receptora antes del envío para ayudar a prevenir el bloqueo causado por una actualización de programa anormal. |
Lista de verificación de compatibilidad
- Match the module’s HUB320F connection and pinout.
- Check the driver IC, decoding method and scan ratio.
- Calculate the pixel load and number of interfaces required for each cabinet.
- Confirm compatibility with the sending card, sending box or VP-series processor in the system.
- For a replacement, compare the existing card and retain the correct screen configuration.
Scan compatibility needs a separate check. Static to 1/128 scan support does not establish compatibility with every module. The supplied specification states that 138-series decoding does not support 1/8 scan or above, listing 138, 5166, 5266, 2012, 2013, 7258 and 32019. Confirm the actual module with our team before ordering.
Navegar por el Gama de tarjetas receptoras LED if your module needs a different interface.
Original HD-R3210 product image

Descarga de especificaciones
HD-R3210 Product Specifications V1.0 (PDF)
Check the matching document, actual board revision and module configuration for installation decisions.
Preguntas frecuentes
How many HUB interfaces does the HD-R3210 have?
It has 10 onboard HUB320F interfaces. Match the connector, pinout and LED module configuration before choosing a receiving card.
Is 512 × 512 pixels a guaranteed load for every module?
No. The specification lists a maximum of 512 × 512 pixels at 60 Hz, while its overview uses the rounded figure of 260,000 pixels. Actual loading depends on the interfaces used and module resolution.
Can it work with synchronous and asynchronous systems?
The specification supports both types of LED display control system, including supported Huidu sending cards, dual-mode sending boxes and VP-series video processors. Confirm the particular sender and configuration.
Does static to 1/128 scan mean every driver IC is supported?
No. Check the module driver IC and decoding method. The specification includes a separate restriction for 138-series decoding; do not infer compatibility from the general scan range alone.
What information should I send before ordering?
Send the LED module resolution, HUB connection and pinout, driver IC, scan method, cabinet layout and sending-device model. For a replacement, include photos of the existing receiving card.
Need help matching your receiving card?
Send module photos, driver-IC details, pixel dimensions and the sending-device model through WhatsApp o nuestra pagina de contacto. for compatibility assistance.
Product listing reviewed on 16 November 2026 by LED-Mall. Specifications follow the linked product document; actual loading depends on system configuration.




Testimonios
No hay comentarios aún.