P1.66 indoor SMD1010 LED module
This discontinued indoor module has a nominal 1.66 mm pixel pitch, a 320 × 160 mm face and a 15 mm depth. The product documentation lists SMD1010 LEDs and constant-current 1/32 scan. Use this page to identify the legacy module and review the requirements for a new display.
Especificaciones del módulo
| Parámetro | Especificación publicada |
|---|---|
| Dimensiones | 320 x 160 × 15 mm |
| Paso nominal | 1.66 mm |
| Paquete de LED | SMD1010 |
| Accionamiento | Constant current, 1/32 scan |
| Brillo | ≥500 cd / m² |
| Refresh and frame frequency | ≥3,840 Hz refresh and ≥60 Hz frame frequency in the documented configuration |
| Poder maximo | 21 W por módulo |
| Grado de protección | IP31, uso en interiores |
| Condiciones de operación | De -20 a +60 °C, 10-90 % de humedad relativa. |
Verify pixel count before configuring a controller. The archived sheet lists 174 × 87 pixels, while the model identifier ends in 192×96. The sheet also differs from the legacy listing on viewing angle. Check the label and actual pixel matrix on the installed module before relying on these figures. Video inputs and transmission distances in the PDF refer to the complete control system.
Choosing modules for a new screen
Compare the module dimensions, mounting points, pixel matrix, scan settings and connector pinout. Use a single production batch for one screen to reduce brightness and color differences. The original listing included the module, an inter-module signal cable and a power cable. It excluded import duties. LED-Mall’s listing does not support using these modules as spares for older displays.
Browse indoor LED modules or contact LED-Mall for module selection.
Especificación original
Download the P1.66 indoor SMD1010 specification (PDF).
Preguntas frecuentes
Can I still buy this P1.66 module?
This model is discontinued and unavailable. Check the current indoor module range for new display projects.
Will another 320 × 160 mm module fit my display?
Check the mounting pattern, actual pixel matrix, module pinout, driver IC and scan settings before choosing another module. The face dimensions alone do not establish compatibility.
What is the listed scan mode?
The archived manufacturer sheet lists constant-current drive with 1/32 scan. Verify the installed module and controller configuration before changing settings.







Testimonios
No hay comentarios aún.