The Xixun D10-270 receives display data for a full-color LED panel. Xixun specifies 24 output data groups and a single-card resolution of 256 × 226 pixels. Use the JH1 and JH2 pin definitions in the specification when matching the receiving card to a module.
Xixun D10-270 receiving card specifications
| Parameter | Normen |
|---|---|
| Output data mode documented by Xixun | 24 Gruppen |
| Einzelkartenauflösung | 256 × 226 Pixel |
| Betriebsspannung | 3.3–5.5 V |
| Betriebsumgebungstemperatur | −20 bis +60 °C |
| Überwachung | Temperatur, Status der Ethernet-Kabelkommunikation und Versorgungsspannung |
| Konfiguration | Readback of configuration files and pre-stored picture settings |
| Display-Unterstützung | Hohe Graustufen und hohe Bildwiederholfrequenz |
Häufig gestellte Fragen
1. Is a 28-group output pinout available in the specification?
The original product listing mentions 28 groups for certain scan and decoder configurations. The linked Xixun specification gives a 24-group pinout only. Confirm the board revision and module decoder before designing for 28 groups.
2. Can I retrieve an existing card configuration?
Yes. The D10-270 supports configuration file readback, and its module memory can store calibration coefficients and module information.
3. How do I check the Ethernet link and supply voltage?
The card supports Ethernet communication status detection and supply voltage detection. The specification also identifies the indicator connections on J7.
XIXUN D10-270 Miniatur-LED-Panel-Empfangskartenspezifikation


Bewertungen
Es gibt noch keine Bewertungen.