Das Colorlight E320 Pro is an LED receiving card for cabinet control, image adjustment and display maintenance. It supports 40 parallel RGB data groups or 120 serial RGB data groups, with 8-bit and 10-bit video input.
Displayeinstellung und Gehäusewartung
HDR10, Infi-bit grayscale compensation, grayscale refinement and full gamma adjustment support display tuning. Pixel-level brightness and chroma calibration help adjust consistency across the LED screen. Color temperature adjustment and low-brightness grayscale controls are also available.
For maintenance, the E320 Pro provides card highlighting and numbering, image rotation, advanced seam correction and a pre-stored image. Cable-status monitoring, receiving-card temperature and voltage monitoring, loop redundancy and firmware redundancy support system diagnosis and recovery.
E320 Pro specifications
The following values are from Colorlight E320 Pro Receiving Card Specification V1.0.0. Check the module scan mode, PWM driver IC, wiring and required operating settings before selecting or replacing a receiving card.
| Parameter | Normen |
|---|---|
| Modell | Colorlight E320 Pro receiving card |
| Control area per card | Up to 512 × 512 pixels in Specification V1.0.0; may vary with the application |
| RGB-Datengruppen | 40 parallel groups or 120 serial groups |
| Video input bit depth | 8-Bit / 10-Bit |
| Frame rate feature | 240 Hz high frame rate; confirm the required cabinet configuration |
| Treiber-IC-Typ | PWM |
| Scan methods | Statisch bis 1/128 Scan |
| Module pixels per scan | Up to 1,024, including cascading |
| Kalibrierung | Helligkeits- und Farbkalibrierung auf Pixelebene |
| Monitoring and redundancy | Cable status, receiving-card temperature and voltage; loop and firmware redundancy |

Häufig gestellte Fragen
What is the Colorlight E320 Pro used for?
The E320 Pro is a receiving card for an LED display control system. It handles cabinet data and display adjustment; module wiring, driver ICs and scan settings must match the cabinet.
How many RGB data groups does E320 Pro support?
The E320 Pro V1.0.0 specification lists 40 groups of parallel RGB data or 120 groups of serial RGB data.
What is the maximum pixel load of E320 Pro?
Specification V1.0.0 lists up to 512 × 512 pixels per card and notes that the control area may vary by application. Confirm the actual module layout and operating settings before deciding the number of cards.
Does E320 Pro support HDR and calibration?
The specification lists HDR10, 8-bit/10-bit input, Infi-bit grayscale compensation and pixel-level brightness and chroma calibration. These features must be configured within a compatible display system.
Is the E320 PDF below the correct specification for E320 Pro?
No. The retained download is labeled E320 V2.3.2 inside the document. It is legacy reference material for E320, not the specification for the E320 Pro sold on this page. The table above uses E320 Pro Specification V1.0.0.
PDF download and model identification
Legacy document: The original download below identifies its model as E320 and its version as V2.3.2. It is retained for reference and must not be used to configure or specify E320 Pro.
Download E320 V2.3.2 specification — legacy E320 document, not E320 Pro




Bewertungen
Es gibt noch keine Bewertungen.