NovaStar AD20 playback can use an internal media source in asynchronous mode or an HDMI input in synchronous mode. Choose internal playback for prepared signage content and HDMI input for a supported live source. Both modes remain subject to the AD20’s 1.3-million-pixel LED load and the documented source-format conditions. This guide is for a small […]
Category Archives: LEDMall Blog
In a CMS130 vs CMS260 decision, choose the CMS130 when a screen within its published 1.3-million-pixel limit needs DVI, VGA, CVBS or documented USB media playback. Consider the CMS260 when the project needs up to 2.6 million pixels, four LED outputs, 3G-SDI or two image layers. Confirm the source format and output map before ordering […]
A replacement receiving card must match your LED screen’s control system, module wiring, driver IC, scan mode, cabinet resolution and saved configuration. Choose the exact original model and revision when available, then confirm the electrical and mechanical fit before ordering. A matching connector or a higher pixel capacity alone does not establish compatibility. This guide […]
Stainless steel: general decorative use of stainless steel are mainly matte brushed stainless steel, mirror stainless steel, can be selected according to customer requirements. Common thickness of 0.8 mm, 1.0 mm, 1.2 mm, 1.5 mm and so on, generally according to the size of the wrapping area to determine the material thickness.
Because of the different shapes and installation positions of the building, the outdoor grille screen needs to be installed in accordance with the site environment and local conditions, without affecting the appearance of the building, so that the LED grille screen can achieve a better display effect. The following are common LED grid screen installation methods
LED has the advantages of small size, low power consumption, long life and environmental protection. In the actual production and development process, the reliability level of the LED chip needs to be evaluated through the life test, and the reliability level of the LED chip is improved through quality feedback. To ensure the quality of LED chips.
It is very necessary to determine the brightness of the LED electronic display. The current requirements for the brightness of the LED display in urban lighting, or new regulations, the brightness of the LED screen is too high, it will cause trouble to nearby residents. In order to avoid bad reactions, this requires businesses to have relevant professional knowledge when customizing and maintaining LED displays.







