The Xixun light sensor is the ambient-light cable accessory for the R30E. Check the cable route and panel opening when replacing the probe. The mounting hole and the visible indicator have different dimensions.
Xixun light sensor installation dimensions
| 參數 | 規格 |
|---|---|
| 配件類型 | Light-sensing cable |
| Compatible unit | Xixun R30E |
| 電纜長度 | 2平方米 |
| 安裝孔尺寸 | 13 mm |
| 指標尺寸 | 20 mm |
常見問題
1. Is this the complete R30E unit or a replacement cable?
This part is the light-sensing cable for the R30E. Select it when the light sensor is the part you need to replace.
2. Should the mounting hole be 13 mm or 20 mm?
The specified hole dimension is 13 mm. The 20 mm figure describes the indicator, so use the smaller dimension when checking the opening.
3. How far can I route the probe from the R30E?
The supplied lead is 2 m long. Measure along the intended cable route, including bends, to check whether it reaches the mounting point.


過去評論
尚未有評論。