The Xixun D10-270 receives display data for a full-color LED panel. Xixun specifies 24 output data groups and a single-card resolution of 256 × 226 pixels. Use the JH1 and JH2 pin definitions in the specification when matching the receiving card to a module.
Xixun D10-270 receiving card specifications
| 參數 | 規格 |
|---|---|
| Output data mode documented by Xixun | 24組 |
| 單卡分辨率 | 256×226像素 |
| 工作電壓 | 3.3–5.5V |
| 工作環境溫度 | −20 至 +60 °C |
| 監控 | 溫度、乙太網路電纜通訊狀態和電源電壓 |
| 型號 | Readback of configuration files and pre-stored picture settings |
| 顯示支持 | 高灰階和高刷新率 |
常見問題
1. Is a 28-group output pinout available in the specification?
The original product listing mentions 28 groups for certain scan and decoder configurations. The linked Xixun specification gives a 24-group pinout only. Confirm the board revision and module decoder before designing for 28 groups.
2. Can I retrieve an existing card configuration?
Yes. The D10-270 supports configuration file readback, and its module memory can store calibration coefficients and module information.
3. How do I check the Ethernet link and supply voltage?
The card supports Ethernet communication status detection and supply voltage detection. The specification also identifies the indicator connections on J7.


過去評論
尚未有評論。