P1.66 indoor SMD1010 LED module
This discontinued indoor module has a nominal 1.66 mm pixel pitch, a 320 × 160 mm face and a 15 mm depth. The product documentation lists SMD1010 LEDs and constant-current 1/32 scan. Use this page to identify the legacy module and review the requirements for a new display.
模塊規格
| 參數 | 已公佈的規範 |
|---|---|
| 尺寸 | 320×160×15毫米 |
| 名義音高 | 1.66 mm |
| LED封裝 | SMD1010 |
| 雲端硬碟 | Constant current, 1/32 scan |
| 亮度 | ≥500 cd/m² |
| 刷新率和幀頻率 | ≥3,840 Hz refresh and ≥60 Hz frame frequency in the documented configuration |
| 最大功率 | 每個模組 21 瓦 |
| 防護等級 | IP31防護等級,室內使用 |
| 運行條件 | −20 至 +60 °C,10–90% 相對濕度 |
Verify pixel count before configuring a controller. The archived sheet lists 174 × 87 pixels, while the model identifier ends in 192×96. The sheet also differs from the legacy listing on viewing angle. Check the label and actual pixel matrix on the installed module before relying on these figures. Video inputs and transmission distances in the PDF refer to the complete control system.
Choosing modules for a new screen
Compare the module dimensions, mounting points, pixel matrix, scan settings and connector pinout. Use a single production batch for one screen to reduce brightness and color differences. The original listing included the module, an inter-module signal cable and a power cable. It excluded import duties. LED-Mall’s listing does not support using these modules as spares for older displays.
Browse indoor LED modules or contact LED-Mall for module selection.
原始規格
Download the P1.66 indoor SMD1010 specification (PDF).
常見問題
Can I still buy this P1.66 module?
This model is discontinued and unavailable. Check the current indoor module range for new display projects.
Will another 320 × 160 mm module fit my display?
Check the mounting pattern, actual pixel matrix, module pinout, driver IC and scan settings before choosing another module. The face dimensions alone do not establish compatibility.
What is the listed scan mode?
The archived manufacturer sheet lists constant-current drive with 1/32 scan. Verify the installed module and controller configuration before changing settings.







過去評論
尚未有評論。