Overzicht van de NovaStar MRV412-S ontvangstkaart
De NovaStar MRV412-S is een LED-ontvangstkaart met 12 standaard HUB75E-connectoren en tot 24 groepen parallelle RGB-data. Deze kaart wordt aangesloten op LED-modules in de displaykast en ontvangt data van een zendkaart via Gigabit Ethernet.
Met een 8-bits videobron op 60 Hz is de maximale resolutie per kaart 512 × 512 pixels met een PWM-driver-IC, of 512 × 384 pixels met een standaard driver-IC. Controleer de driver-IC van de module en de configuratie van de behuizing bij het kiezen van de kaart.
Whole-card loading: The figures below apply to all module outputs on one card together. They are not a separate pixel allowance for each HUB75E connector. These published conditions are for an 8-bit source; confirm the required configuration before using a different source bit depth.
Technische specificaties
| Parameter | Specificaties |
|---|---|
| Moduleconnectoren | 12 × standaard HUB75E |
| Parallelle RGB-gegevens | Maximaal 24 groepen |
| Maximale resolutie: PWM-driver-IC | 512 × 512 bij 60 Hz, 8-bits videobron |
| Maximale resolutie: gangbare driver-IC | 512 × 384 bij 60 Hz, 8-bits videobron |
| Ingangsspanning | DC 3.8 V tot 5.5 V |
| Nominale stroom | 0.4 A bij 4.2 V |
| Nominaal stroomverbruik | 1.68w |
| bedrijfstemperatuur | -20°C tot +70°C |
| Bedrijfsvochtigheid | 10% RV tot 90% RV, niet-condenserend |
| Bewaar temperatuur | -40°C tot +85°C |
| Luchtvochtigheid opslag | 0% RV tot 95% RV, niet-condenserend |
| Afmetingen | 91.5 x 144.0 x 19.3 mm |
| Nettogewicht | 93.5 g per ontvangstkaart |
Het werkelijke stroomverbruik varieert afhankelijk van de instellingen, het gebruik en de omgevingsomstandigheden. Zie de onderstaande specificaties voor pinbenamingen en installatietekeningen.
How the MRV412-S Connects to Your Cabinet
| Interface | Rol |
|---|---|
| Gigabit Ethernet-poorten | Connect to a compatible sending card and cascade other receiving cards. Either port can serve as input or output. |
| 12 HUB75E-connectoren | Connect to LED modules, supporting up to 24 parallel RGB data groups. |
| Voedingsconnectoren | Connect the DC input supply. The specification permits either power connector to be used. |
| 5-pin LCD connector | Connect a cabinet LCD module for receiving-card status information. |
Size the LED module power separately from the receiving card’s rated 1.68 W. Confirm the DC 3.8–5.5 V input and module wiring against the exact cabinet configuration.
Schermaanpassing en -kalibratie
- Kleurbeheer ondersteunt Rec.709, DCI-P3, Rec.2020 en aangepaste kleurgamuts.
- 18-bits+ verbetert de grijsschaalweergave bij lage helderheid. Helderheids- en kleurkalibratie op pixelniveau werkt met het kalibratiesysteem van NovaStar.
- Door snel donkere of lichte lijnen aan te passen, worden zichtbare naden gecorrigeerd; aanpassing over meerdere batches heen helpt bij het op elkaar afstemmen van kasten of modules uit verschillende productiebatches.
- Individuele RGB-gamma-aanpassing vereist NovaLCT en een controller die deze functie ondersteunt.
- Lage latentie is standaard ingeschakeld. Een latentie van één frame aan de ontvangende kant vereist modulestuurprogramma-IC's met ingebouwd RAM-geheugen.
- Voor 3D-uitvoer is een controller met 3D-ondersteuning vereist. Rotatie in stappen van 90° wordt ondersteund; vrije-hoekrotatie vereist de MCTRL R5-controller en SmartLCT.
- Kalibratiecoëfficiënten kunnen worden geüpload, uitgelezen, opgeslagen in de hardware en gewist, waarbij versneld uploaden indien nodig wordt ondersteund.
Installatie, bewaking en back-up
Data group mapping shows where data groups appear within a cabinet. Mapping 2.0 uses different background colors for Ethernet ports and adapts to cabinet resolutions to show controller, port and receiving-card numbers. Its cabinet-resolution mapping supports a minimum of 36 × 20 pixels. The card supports stored images for startup or signal loss, temperature and voltage monitoring, and a cabinet LCD connection. Bit-error detection and Ethernet disconnection detection assist with communication troubleshooting.
Firmware and configuration parameters can be read back to a computer. Reliability functions include loop backup, dual backup of configuration parameters and dual program backup. Loop backup requires primary and backup line connections between the controller and receiving cards. Configuration backup stores parameters in both application and factory areas; dual program backup stores two firmware copies. These backup functions serve different recovery tasks.
Check Before Ordering a Replacement
- Record the exact card model, hardware revision, working firmware and cabinet configuration before removing the original card.
- Match the module driver IC, scan configuration, HUB75E pinout, cabinet pixel layout and 8-bit source loading conditions.
- Check the 91.5 × 144.0 × 19.3 mm dimensions, mounting clearance, power connector and DC supply range.
- Confirm the sending controller and software needed for 3D, independent gamma or free-angle rotation. Similar MRV model names and connector counts alone do not establish replacement compatibility.
Send your cabinet configuration and original card model for MRV412-S selection assistanceof blader NovaStar-besturingsproducten.
Productafbeelding en specificaties downloaden

Download MRV412-S specification V1.0.0 — September 18, 2026 (PDF)
Veelgestelde Vragen / FAQ
Hoeveel HUB75E-connectoren heeft de MRV412-S?
Het beschikt over 12 standaard HUB75E-connectoren en ondersteunt tot 24 groepen parallelle RGB-data.
Welke resolutie kan één MRV412-S ontvangstkaart laden?
Bij 60 Hz met een 8-bits videobron is de limiet 512 × 512 pixels met een PWM-driver-IC of 512 × 384 pixels met een standaard driver-IC. Het type driver-IC maakt deel uit van de specificatie, dus de twee limieten zijn niet uitwisselbaar.
Welke voedingsspanning heeft de MRV412-S nodig?
Het opgegeven ingangsspanningsbereik is 3.8 V tot 5.5 V DC. De nominale stroomsterkte is 0.4 A bij 4.2 V en het nominale stroomverbruik is 1.68 W.
Ondersteunt de MRV412-S lage latentie en 3D?
Ja. Een latentie van één frame aan de ontvangende kant vereist driver-IC's met ingebouwd RAM-geheugen. Voor 3D-uitvoer moet de controller ook 3D ondersteunen.
Kan de MRV412-S een LED-displaybeeld roteren?
Het ondersteunt rotaties van 0°, 90°, 180° en 270°. Rotatie onder andere hoeken vereist de speciale MCTRL R5-controller en SmartLCT-software.
Is the maximum resolution per card or per HUB75E port?
It is the total maximum for one card across its module outputs. At 60 Hz with an 8-bit source, use 512 × 512 for PWM driver ICs or 512 × 384 for common driver ICs.
Can an MRV412-S replace an MRV412-N without checking the cabinet?
Confirm the exact hardware revision, firmware, module wiring, driver IC, scan configuration, power and mechanical fit first. Similar model names and 12 HUB75E connectors do not establish a direct replacement.




Reviews
Er zijn nog geen Beoordelingen.